Quality Control and Assurance just got easier | wittgas.com

最新消息

Quality Control and Assurance just got easier

2015.04.17

Witt-Gasetechnik is extending its successful range of leak test devices: The Leak-Master entry-level model now also benefits from electronic control as the new "Leak-Master Easy Plus". The most important benefit for the QC/QA regime: all QC/QA measurements are logged digitally. And there’s more …

带控制单元 PLUS 的威特密封性检测仪 LEAK-MASTER® EASY

带控制单元 PLUS 的威特密封性检测仪 LEAK-MASTER® EASY

Witt's new Leak-Master excels at finding even the smallest holes in rigid or flexible packaging quickly and precisely. Inert gas and vacuum packaging can be tested for leaks, it’s Easy and it doesn’t involve trace gas: The test product is placed in a chamber filled with water. When the lid is closed, the air space above the water level is evacuated, the package inflating under water. If air bubbles emerge, there is a leak. This test method is especially straightforward and cost effective and has the additional advantage that the weak point of the packaging is visible.

Sparing the trees …

But the new Plus version of the Leak-Master Easy can do even more:

It records, saves and communicates (via Ethernet and SD card) its test programme and results. That does away with tiresome and time-consuming logging by hand. This means QC/QA Managers can check and all leak test results at any time, especially those increasingly associated with Certification and Customer KPIs.

Standardising leak testing

Operation is via a coloured touchscreen. Products, users and also customised test programmes can configured rapidly and easily. After logging on to the device and selecting the product to be tested, the user places the packaging in the test chamber, closes the cover and starts the test programme. The Easy's electronics then do all the rest. The pre-set vacuum is automatically generated and maintained over the defined time period. The user performs a visual inspection as usual and has to enter whether the packaging was leakproof or not after the test process. The end result is a standardised test sequence that can be reproduced at any time. So simple – yet so effective.

Electronics allows customised test programmes

Special test programmes are also possible using the electronics, for instance height simulation: At what height above sea level does the material yield? At the touch of a finger, the system can simulate a flight profile - another smart feature!

The Leak-Master Easy is the entry-level model in the Leak-Master® series for leak testing of packaging. Besides the water bath, with or without electronic control, variants with CO2 as the test gas are also available. The test is performed without contact in a vacuum chamber using a sensor, which logs any escaping CO2 in next to no time. The in-line variant "Leak-Master MapMax" can be integrated seamlessly into a packaging line. Testing for carbon dioxide is also carried out here, but fully automatically and with a speed of 15 cycles per minute so that the entire production is logged. This feature is truly unique.

All detectors are available in multiple chamber sizes. Please visit www.leak-master.net.

新闻

联系人

Alexander Kampschulte

Alexander Kampschulte

请来电资询

+49 (0)2302-8901-147

提交咨询 请求回电

联系人

Alexander Kampschulte

Alexander Kampschulte

请来电资询

+49 (0)2302-8901-147

提交咨询 请求回电

专家咨询

您需要咨询?
我们给您电话!

现在提交回电需求