Gas terugslagklep ULTRA 12

WITT Gas terugslagklep ULTRA 12, messing

WITT Gas terugslagklep ULTRA 12, roestvrij staal en aluminium

Datablad Offerte aanvraag

Gebaseerd op ULTRA 10 - uw ontwerp op maat: meerdere combinaties van behuizings- en afdichtingsmaterialen, met of zonder filter

vrije keuze van materiaal voor de behuizing (messing, roestvrij staal, aluminium) en afdichting (NBR/CR, FPM/FKM, EPDM/FFKM), met of zonder filter
voor speciale vereisten, zoals een corrosieve omgeving, acetyleen, lichte constructie, temperaturen boven 70 °C

Gebaseerd op Ultra 10 inclusief:

veiligheidselement: gaskeerklep [NV]
ieder appendage wordt 100% getest
DIN EN ISO 5175-2
biedt weining drukverlies door een vernuftigd klepsysteem, openingsdruk (ca. 4 mbar)
compact en licht: 35 X 60 mm, 221 g, G ½"
minimale geluidsemissie
ideaal voor toepassingen waar met lage drukken wordt gewerkt zoals thermische processen, biogas enz.

Informatie

WITT non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve 100% tested.

ULTRA 12 is based on ULTRA 10 and is customised according to the requirements of the customer - ideal for special requirements. A modular system which allows flexible material combinations for housing and sealings.

Combination possibilities

housing available in brass, stainless steel or aluminium
sealings of NBR, CR, FKM, EPDM, FFKM for example
with or without dirt filter in gas inlet

Benefits

precisely tailored design for special requirements. For example corrosive environments, acetylene, ultra-lightweight construction, temperatures above 70 °C / 158 °F
a spring loaded non-return valve prevents back feeding of gases which could lead to unwanted gas mixtures
low pressure drop – using complex valve assembly with low opening pressures (approx. 4 mbar)
stainless steel filter (100 μm) in the gas inlet protects the non-return valve against dirt contamination, extending the service life
flow-optimised valve system for:

- ultra low pressure drop
- minimal noise emission

no leaks – using of a spring loaded valve assembly with elastomer sealing
in accordance to DIN EN ISO 5175-2
available in brass, stainless steel or aluminium
diverse applications – useful for many technical gases
reduce installation costs – the spring loaded valve is not affected by gravity and may be installed in any orientation

Operation / Usage

non-return valves are used to protect equipment and pipelines against dangerous reverse gas flow.
Use is possible for applications according to EN 746-2
WITT non-return valves may be mounted in any position / orientation

Maintenance

annual testing of the non-return valve and body leak tightness is recommended
WITT is happy to supply special test equipment
non-return valves are only to be serviced by the manufacturer

Approvals
Company certified according to ISO 9001
Cleaned for Oxygen Service according to EIGA IGC Doc 13/12/E: Oxygen Pipeline and Piping Systems