Non-Return Valves | wittgas.com

Non-Return Valves

Witt Non Return Valves 70 70u

Non-Return Valve 70 / 70U

Non-return valve for the prevention of unintended gas mixtures, for flow rates up to 1120 m³/h (air), up to 16 bar, for use in thermal processing, certified to EN 746-2, G 3/4 - G 1.1/2

WITT Non-return valve R53-ES

Non-return Valve R53-ES

Non-return valve stainless steel for the prevention of unintended gas mixtures, for flow rates up to 130 m³/h (air), up to 25 bar, G 1/8 - 3/8

WITT Non-return-valve 654

Non-Return Valve NV654

Non-return valve for the prevention of unintended gas mixtures, for flow rates up to 130 m³/h (air), up to 60 bar, G 1/8

WITT Non-return valve 654-ES

Non-Return Valve 654-ES

Non-return valve stainless steel for the prevention of unintended gas mixtures, for flow rates up to 130 m³/h (air), up to 60 bar, G 1/8 - 3/8

WITT Non-return valve NV100

Non-Return Valve NV100

Non-return valve for the prevention of unintended gas mixtures, for flow rates up to 130 m³/h (air), up to 25 bar, G 1/8 - 3/8

W I T T Non Return Valve N V150

Non-return Valve NV150

Non-return valve for the prevention of unintended gas mixtures, for flow rates up to 80 m³/h (air), up to 16 bar, G 1/2

W I T T Non Return Valve N V150 E S

Non-return Valve NV150-ES

Non-return valve, stainless steel, for the prevention of unintended gas mixtures, for flow rates up to 80 m³/h (air), up to 16 bar, G 1/2

WITT Non-return valve NV200

Non-Return Valve NV200

Non-return valve for the prevention of unintended gas mixtures, for flow rates up to 1900 m³/h (air), up to 16 bar, G 1/2 - G 1

WITT Non-return valve NV600-ES

Non-Return Valve 600-ES

Non-return valve, stainless steel, for the prevention of unintended gas mixtures, for flow rates up to 1900 m³/h (air), up to 16 bar, G 1/2 - G 1

WITT Non-return valve 600H

Non-Return Valve 600H

Non-return valve for the prevention of unintended gas mixtures, for flow rates up to 1900 m³/h (air), up to 40 bar, G 1/2 - G 1

Products

WITT Zentrale

Give us a call!

Headquarters: +49 (0)2302-8901-0
WITT UK: +44 (0)1925 234466

Send request Get call-back

A safe gas supply with gas non-return valves

WITT gas non return valves (Check valves) are used to protect plants, piping systems and outlet points against dangerous gas backflow and unwanted gas mixtures. Key features of WITT’s unique design are their very low opening pressures and very low pressure drop, so they are particularly suited to low operating pressure applications. A high-quality sealing system with elastomers prevents leaks. Dirt filters at the inlet ensure the long service life of these devices.

Non-return valves are also known as gas back-flow valves or check valves. WITT gas non-return valves can be installed in any orientation. They are available with various connections, in brass or stainless steel, and can be used for all technical gases such as oxygen, nitrogen, methane, hydrogen and compressed air. The WITT product range offers a wide selection of nominal sizes (up to DN 200) and flow rates (0.01 - 3,000 m3/h).

WITT non-return valves in thermal processing plants

WITT non-return valves conform to EN 746-2 and are particularly suitable for use in thermal processing plants. Various WITT non-return valves are specially certified by the DVGW (Deutscher Verein des Gas- und Wasserfaches) as not needing any additional flame arrestor in the line when burning methane in air – thereby reducing costs and pressure drops. The low opening pressure of only 3 mbar and the high flow rate provide ideal protection for burner systems and prevent gas backflow and flashbacks.

WITT non-return valves can be installed in the air or oxygen line as well as in the fuel gas supply, thus reducing acquisition and storage costs. WITT non-return valves are 100% tested to EN 730-2 prior to delivery and offer the highest level of safety.

Safe biogas plants with WITT gas non-return valves

In the air delivery lines to fermenters and biogas lines, WITT gas non-return valves are also characterised by their ultra-low opening pressures. WITT stainless steel valves with DVGW approval for operation in biogas plants allow an air flow only in one direction and thus avoid unwanted and dangerous gas mixtures. Due to their low pressure losses, the use of small pipe cross-sections is possible, which reduces the operating costs for the compressor performance. WITT check valves are particularly leak-tight and therefore particularly safe. The valves are 100% tested and conform to DIN EN ISO 5175-2. The use of stainless steel in the gas return valves ensures a long service life, as these materials are extremely resistant to corrosion. They can also be retrofitted into existing air and gas supply lines.

Flyer: Non-return valves in biogas plants Flyer: Non-return valves in thermal processing plants

Practical Example: Non-return Valves in Heat Treatment

WITT Zentrale

Give us a call!

Headquarters: +49 (0)2302-8901-0
WITT UK: +44 (0)1925 234466

Send request Get call-back

Expert advice

You need advice?
We call you back!

Request call-back now