Купольный регулятор давления 737LE-HD/S-ES CO2, for high inlet and outlet pressures

нержавеющая сталь, особенно для CO2, соединение G 3/4" / G 1", Kv-коэфф. 1,65

  • максимальная стабильность давления даже при непостоянном входном давлении, расходе газа и температуре
  • область регулирования 0,5-26 бар
  • максимально допустимое входное давление до 100 бар
  • также для применения с агрессивными и токсичными газами
  • ready-to-use
  • впускной патрубок: G 3/4″, выпускной патрубок: G1"
  • Опция: с запираемым кожухом на пилотный регулятор, для предотвращения манипуляций

Больше практических примеров вы можете найти в разделе «Приложения».

Технические данные Загрузки
Запрос цены


High-performance dome-loaded pressure regulator-set.
For high and varying flows requiring maximum pressure stability.
A complete solution, applicable as a manifold pressure regulator per DIN EN ISO 7291.


  • Pilot Control Tube (PCT)
    One of the features enabling highly accurate control of outlet pressure
  • Balanced Seat Design (BSD)
    Further enabling control precision, high reliability and low maintenance
  • A complete solution, ready to use
    With integrated pilot pressure regulator, and stainless steel pressure gauges, completely assembled and tested
  • Own-medium controlled
    Enabling autonomous operation
  • Closed system
    No gas is released to atmosphere
  • Simple to install and operate
    Removable spindle enables simple setting of the required outlet pressure. Can be positioned at any angle / orientation. For indoor and outdoor installation.

Operation / Usage

  • Ideal for process gas supply where pressure accuracy is required even when inlet pressures and flow rates are varying.
  • High flow rates and outlet pressure accuracy are achieved, even when the difference between inlet and outlet pressures is small.
  • Own-medium controlled, with integrated pilot gas regulator, meaning no separate gas supply is required.


  • Annual testing of body leak tightness is recommended.
  • Depending on application, moving wetted parts may need periodic replacement.
  • Device-specific Maintenance-Kit available upon request.


  • Company certified according to ISO 9001, ISO 22000 and PED 2014/68/EU Module H
  • CE-marked according to PED 2014/68/EU
  • ATEX 2014/34/EU with ignition hazard analysis according to EN 1127-1, DIN EN 13463-1 and ZH1/200
  • Analysed for Food Safety per HACCP-Analysis
  • Fulfils the requirements of EU Regulations (EC) 1935/2004, and (EC) 2023/2006
  • Fulfils the requirements of German Food and Feed (LFGB) Law, and is suitable for contact with food gases


Lockable spindle hood against unauthorized adjustment

Available upon request

  • Certificates and test reports
  • Other Dome types
  • Switchover systems / parallel supply systems
  • Customer-specific / customised versions.