Dome Pressure Regulator 737LE-HD/S CO2, for high inlet and outlet pressures

Brass, especially for CO2, connections G 3/4" F / G 1" F, Kv value 1.65 / Cv value 1.9

  • maximum pressure stability even during flow and temperature fluctuations
  • outlet pressure range 0.5- 26 barg
  • suitable for high pressures at inlet, up to 100 barg
  • temperature range -30 °C to +50 °C (-22 °F to +122 °F)
  • ready-to-use
  • inlet connection: G 3/4", outlet connection: G 1"
  • option: lockable spindle hood against unauthorized adjustment
  • also available in Stainless Steel

For more practical examples go to our application section.

Data sheet Downloads
Quotation request

Information

High-performance dome-loaded pressure regulator-set.
For high and varying flows requiring maximum pressure stability.
A complete solution, applicable as a manifold pressure regulator per DIN EN ISO 7291.

Features

  • Pilot Control Tube (PCT)
    One of the features enabling highly accurate control of outlet pressure
  • Balanced Seat Design (BSD)
    Further enabling control precision, high reliability and low maintenance
  • A complete solution, ready to use
    With integrated pilot pressure regulator, and stainless steel pressure gauges, completely assembled and tested
  • Own-medium controlled
    Enabling autonomous operation
  • Closed system
    No gas is released to atmosphere
  • Simple to install and operate
    Removable spindle enables simple setting of the required outlet pressure. Can be positioned at any angle / orientation. For indoor and outdoor installation.

Operation / Usage

  • Ideal for process gas supply where pressure accuracy is required even when inlet pressures and flow rates are varying.
  • High flow rates and outlet pressure accuracy are achieved, even when the difference between inlet and outlet pressures is small.
  • Own-medium controlled, with integrated pilot gas regulator, meaning no separate gas supply is required.

Maintenance

  • Annual testing of body leak tightness is recommended.
  • Depending on application, moving wetted parts may need periodic replacement.
  • Device-specific Maintenance-Kit available upon request.

Approvals

  • Company certified according to ISO 9001, ISO 22000 and PED 2014/68/EU Module H
  • CE-marked according to PED 2014/68/EU
  • ATEX 2014/34/EU with ignition hazard analysis according to EN 1127-1, DIN EN 13463-1 and ZH1/200
  • Analysed for Food Safety per HACCP-Analysis
  • Fulfils the requirements of EU Regulations (EC) 1935/2004, and (EC) 2023/2006
  • Fulfils the requirements of German Food and Feed (LFGB) Law, and is suitable for contact with food gases

Option:

Lockable spindle hood against unauthorized adjustment

Available upon request

  • Certificates and test reports
  • Other Dome types
  • Switchover systems / parallel supply systems
  • Customer-specific / customised versions.