Non-Return Valve NV300, Stainless Steel (formerly 338-ES)

Non-return valve, stainless steel, for the prevention of unintended gas mixtures, for flow rates up to 3260 m³/h (air), up to 16 bar for use in thermal processing plants, certified to EN746-2, G 1 - G 1.1/4

safety element: non-return valve [NV]
every non-return valve 100% tested
protects against flashbacks, for fuel gas-compressed air- mixtures
ultra-low opening pressures (approx. 3.5 mbar), ultra-low pressure drop
ideal for biogas desulphurisation systems
also ideal for use with corrosive gases
dirt filter (100 μm) on gas inlet
65 X 115 mm, 1.500 g

Information

WITT non-return valves (check valves) for reliable protection against dangerous reverse gas flow. Every non-return valve (check valve) 100% tested.

Benefits:

a spring-loaded non-return valve (check valve) prevents a return flow of gases which could lead to unwanted gas mixtures
low pressure drops – using complex valve assembly with low opening pressures
no leaks – using a spring-loaded valve assembly with elastomer sealing
stainless steel filter (100 μm) in the gas inlet protects the non-return valve against dirt contamination, extending the service life
diverse applications – useful for many technical gases

Operation / Usage:

non-return valves (check valves) are used to protect equipment and pipelines against dangerous reverse gas flow. Use is possible for applications in accordance with EN 746-2
ideal for use with corrosive gases in the chemical industry, process technology or in laboritories
WITT non-return valves (check valves) may be mounted in any position / orientation the maximum ambient / working temperature is 70 °C / 158 °F

Maintenance:

annual testing of the non-return valve (check valve) and body leak tightness is recommended
WITT is happy to supply special test equipment
non-return valves (check valves) are only to be serviced by the manufacturer. The dirt filter may be replaced by competent staff

Approvals
Company certified to ISO 9001and PED 2014/68/EC Module H
CE-marked in accordance with PED 2014/68/EC
Cleaned for Oxygen Service according to EIGA IGC Doc 13/12/E: Oxygen Pipeline and Piping Systems